Using The Remote Control - Sony KP-51HW40 Operating Instructions Manual

Using the Remote Control
The following table describes the buttons on the remote control that are for
more advanced functions.
Button Descriptions
Outside Panel
Button Description
[] MUTING Press to mute the sound. Press again or press VOL + to
restore the sound.
[i]---
NE--
N---
lit--
N---
N---
[E--
N---
N---
N--
H--
N---
d)®®
®®®
®®®
SONY
in minutes (15, 30, 45, 60, or 90) that you want the
projection TV to remain on before shutting off
automatically. Cancel by pressing until SLEEP OFF
appears or turning the power off. While the Sleep feature is
set, press once to view the remaining time.
[] ANT Changes between the VHF/UHF input and the AUX input.
[] DISPLAY Press once to display the cmrent time and channel label (if
set) and channel number. I ress again to turn Display off.
See page 57 for details on setting the time.
[] JUMP Press to jump back and forth between two channels. The
projection TV alternates between the cmrent channel and
the last channel that was selected.
[] FREEZE Freezes the window picture. Press again to restore the
picture.
view and select fi-om all receivable channels scrolling on
the screen without leaving the current one.
Pressing down on the center of the joystick selects the item.
[] VOL +/- Adjusts the volume.
[] PlC MODE I ress repeatedly to step through the available video picture
modes: Vivid, Standard, Movie and Pro. Also available in
the Video menu. For details, see "Selecting Video Options"
on page 49.
Favorite Channels on page 40.
[] RESET Press when in a menu to reset the settings to the factory
defaults.
34