Sony KP-51HW40 Operating Instructions Manual page 15

Installing and Connecting the Projection TV
Connection Description
[_ AUX Allows you to view local and cable channels if your cable
provider does not feature local channels. You can switch
3o
between local and cable channels easily by pressing ANT
on the remote control. Devices connected to the AUX
input cannot be viewed in Twin View.
[_ TO CONVERTER This is a VHF/UHF OUT jack that lets you set up your
proiection TV to switch between scrambled channels
(through a cable box) and normal cable channels (CATV).
Use this jack instead of a splitter to get better picture
quality when switching between scrambled and _
unscrambled cable channels.
V i#/O iF
?:;nne i; t ; yo ir Y iF)dH ;nteni; orc bie..........................
<
[_ S VIDEO Connects to the S VIDEO OUT jack of your VCR or other ®
(Rear and front) S ViDEO_equipped video component. Provides better
picture quality than the VHF/UHF jacks or the Video IN
jack. _
0
[_ VIDEO Connects to the audio and video OUT jacks on your VCR
(L/R)/AUDIO or other video component. A fourth video input (VIDEO
(Rear and front) 2) is located on the front panel of the pmiection TV.
[_ Y/PB/PR Connects to your DVD player's or Digital Set-top box's
(L/R)/AUDIO component video (Y, PB, PR) and audio (L/R) jacks.
[_ TV OUT Connects to an AV receiver for greater control of all audio
and video equipment (see page 30). For detailed
information about connection, refer to the operating
manual supplied with the AV receiver.
[_ AUDIO OUT Connects to the left and right audio inputs of your audio or
(VARIFIX) video component.
L (MONO)tR
[_ CONTROL S To control other Sony equipment with the projection TV's
IN/OUT remote control, connect the CONTROL S IN jack of the
equipment to the CONTROL S OUT jack on the
proiection TV with the CONTROL S cable.
To control the projection TV with a remote control for
another Sony product, connect the CONTROL S OUT
jack of the equipment to the CONTROL S IN jack on the
projection TV with the CONTROL S cable.
15