Setting Up The Pmiection - Sony KP-51HW40 Operating Instructions Manual

Installing and Connecting the Projection TV
Setting Up the Projection TV Automatically
After you fi ush connecting yol r project on TV, yol can un Auto Setup to
set up your channels. The Auto Setup screen appears when you turn your
projection TV on for the first time after installing it. if you do not want to set
up the channels at this time, you can do it later by using the Auto Program
feature in the Channel menu (see page 54).
Using Auto Setup 1 Press POWER on the front panel of your projection TV or on the remote
control to turn on the projection TV.
2 Press the TV (FUNCTION) button on your remote control. Red light will
briefly appear.
3 Press CH+ on your projection TV to run Auto Setup, or press CN- to
exit. If you use the channel buttons on your remote control, be sure to
use the main set of buttons (_]).
Projection TV front panel
[]
"NMEP,_TAND B Y
o
_REO
o
I'/NIDEO
KZZD
_NU
OZO
i
"1-
-t
-3
32