Method Of Setting The Service Adjustment Mode - Sony KP-57XBR10W Service Bulletin

TV Products Service Bulletin No. 531
•

Method of setting the Service Adjustment Mode.

3. The screen displays the item being adjusted.
4. The category is reached by using the remote buttons 2 and 5.
5. The Adjustment item is selected using remote buttons 1 and 4.
6. The Data is changed using remote buttons 3 and 6.
Using the remote 2 or 5 button you will search through the category shown in the chart below.
The acronyms above are the titles of the different adjustment categories. See the Service Mode charts for the
definition of the various categories. Example: VDSP (Vertical Deflection Signal Processor).
1. If you want to recover the original data (if you did not save any changes) press the 0 then Enter button on
the remote.
Writing new data into memory.
1. After adjusting the data it must be placed into memory (writing). This is done using the
muting button (the data turns red) then the Enter button. (The data turns green)
Memory confirmation Method
1. After finishing all adjustments and saving the data changes, remove the AC plug from the outlet, and then
plug in again.
2. Turn unit on to Service Mode.
: