Sony KP-51WS500 Operating Instructions Manual page 32

Instalfing and Connecting the Projection TV
Setting Up the Projection TV Automatically
After you finish connecting your projection TV, you can run Auto Setup to
set up your channels. The Auto Setup screen appears when you turn your
projection TV on for the first time after installing it. If you do not want to set
up the channels at this time, you can do it later by using the Auto Program
feature in the Channel menu (see page 54).
_The Auto Setup feature d_s not app y for installationsthat use a cable
box for all channe se ee_i0n
Using Auto Setup
1
2
3
Press POWER on the front panel of your projection TV or on the remote
control to turn on the projection TV.
Press the TV (FUNCTION) button on your remote control. Red light will
briefly appear.
Press CH+ on your projection TV to run Auto Setup, or press CH- to
exit. If you use the channel buttons on your remote control, be sure to
use the main set of buttons (_).
Projection TV front panel
-1
[]
TIMERF3TAND B Y
0
STEREO
0
VOLUME
WNI_
@
i
32