Sony KP-51WS500 Operating Instructions Manual page 82

The PDF of thisservice manual is notdesignedto be printedfrom coverto cover. The pages vary in size, and mustthereforebe printedin sections
based on page dimensions.
NON-SCHEMATIC PAGES
Data that does NOT iNCLUDE schematicdiagramsare formatted to 8.5 x 11 inchesand can be printedon standardletter-sizeand/orA4-sized paper.
SCHEMATIC DIAGRAMS
The schematicdiagram pages are providedin two ways, full size andtiled. The full-sizedschematicdiagramsare formattedon papersizes between
8.5" x 11" and 18" x 30" dependinguponeach individualdiagramsize. Those diagramsthat are LARGER than 11"x 17" infull-size modehavebeen
tiled for yourconvienceand can be printedon standard11"x 17"(tabloid-size)paper,and reassembled.
TO PRINT FULL SIZE SCHEMATIC DIAGRAMS
If youhave accessto a large paper plotteror printercapableof outputtingthe full-sized diagrams,outputas follows:
1) Note the page size(s) of the schematics youwant to outputas indicatedin the middle windowat the bottomof the viewingscreen.
2) Go to the File menu and selectPrint Set-up. Choose the printername and driverfor yourlarge format printer. Confirm that the printer settings
are set to output the indicated page size or larger.
3) Close the Print Set Up screen and return to the File menu. Select "Print..." Input the page number of the schematic(s)you wantto printin the
print range window. Choose OK.
TO PRINT TILED VERSION OF SCHEMATICS
Schematicpages that are largerthan 11"x 17"full-sizeare providedin a 11"x 17"printabletiledformat near the end ofthe document. T hese can be
printedto tabloid-sizedpaperand assembledto full-size for easy viewing.
If youhave accessto a printercapable of outputtingthe tabloidsize (11"x 17")paper,then outputthe tiledversionof the diagramas follows:
1) Note the page number(s)of the schematicsyouwant to outputas indicatedin the middlewindow at the bottomof the viewingscreen.
2) Go to the File menuand select Pdnt Set-up. Choose the printername anddriverfor yourprinter. Confirm thaithe plotter settingsare setto output
11" x 17", or tabloid size paper in landscape ( _ ) mode.
3) Close the PrintSet Up screen and retum to the File menu. Select"Print..." Input the page number of the schematic(s)youwantto print in the
print range window. Choose OK.
TO PRINT SPECIFIC SECTIONS OF A SCHEMATIC
To printjust a particularsectionof a PDF, ratherthan a full page, access the GraphicsSelect tool in the Acrobat Reader toolbar.
T
1) To viewthe Graphics Select Tool, pressand HOLD the mouse buttonover the Text Select Toolwhichlooks like:J-[_]_.
Thistool will expand to reveal to additionaltools.
Choose the Graphics Select tool by placing the cursorover the button on of the far right that lookslike: __._.
2) After selectingthe Graphics Select Tool,place your cursorin the document window and the cursor will change to a plus(+) symbol.Click and
drag the cursor over the area you want to print. When you release the mouse button, a marquee (or dotted lined box) will be displayed outlining
the area you selected.
3) With the marqueein place, go to the file menuand select the "Print..." option. Wnen the print window appears, choose the optionunderthe section
called "Print Range"which says"Selected Graphic".
:-----:
Select OK and the outputwill print onlythe area that yououtlined with the marquee.,'_.__._;
(continued >)