Other Information
Problem
Possible
Remedies
You get the same program in the _1
Both may be set to the same channel. Try changing
channels
in either the main
window picture as in the main
picture
You cannot get anything
but TV _1
channels
in your second picture
Favorite Channel does not
J
display your choices
Some video sources do not
appear when you press -I-V/
VIDEO
picture or the window picture.
:3
You may be running all your channels
through a cable box. The cable box will
only unscramble
one signal at a time, so you cannot use the Twin View feature. If
possible, run a direct cable to your projection
TV's VHF/UHF
input (this will only
work if your cable system provides an unscrambled
signal.)
Be sure the video label has not been set to skip your video inputs. See the Setup
menu on page 59.
Verify that Favorite Channel
is set to Manual
in the Channel menu (see
"Favorite
Channel"
on page 53).
:3
Ensure that Video Label is not set to SKIP (see "'Video label;'
on page 59),
¢B
_a
75