Using The Features; Using Twin View Tm - Sony KP-51WS500 Operating Instructions Manual

Using the Features
f RqlEEZE
VOL
_NO0_ I_NBIOT_N
RESET
©
SONY
Rk_yg09
Button Description
[] PowER Tum on and off the projection TV and other audio/vide0
buttons
equipment you have programmed into the remote control.
(GREEN) For instructions, see "Programming the Remote Control'"
on page 68.
[] FUNCTION Select the equipment (Tv, SAT/CABLE) that you want to
• --_
buttons
operate. The indicator lights up momentarily when pushed
to show which device the remote control is operating.
[]
TV/VlDEO
Cycles through the video equipment connected to your
projection TV's video inputs: TV, VIDEO 1, VIDEO 2,
VIDEO 3, VIDEO 4, VIDEO 5, VIDEO 6 and VIDEO 7.
--_ [] 0 S 9 and Press o- 9 to select a channel, the channel changes after 2
ENTER seconds. Press ENTER to select immediately.
[] (_ Turns on/off Twin View. For details, see "Using Twin
View TM''on page 41.
GUIDE Displays the program guide of your satellite.
[] MENU Press to display the projection TV on-screen menu. Press
........ again to exit from the menu.
[] CH +/- Scan through channels.
[]
DRC/
Press repeatedly to step through the available high-
CINEMOTION resolution picture modes: Interlaced, Progressive and
CineMotion. For details, see "Using the Video Menu" on
page 49.
[] WiDE MODE Press to step through the wide Screen modes: wide zoom,
Normal, Full and Zoom. For details, see "Using Wide
Screen Mode" on page 47.
B To scan rapidly through the
channels, press and hold down
CH+ or CH-.
_n
tQ
9J
t_
35