Sony KP-51WS500 Operating Instructions Manual page 68

Programming the Remote Control
The remote control is preset to operate Sony brand video equipment.
Sony
Equipment
Beta, ED Beta VCRs
8 mm VCR
VHS VCR
Switch Position
on Remote Control
Programmable
Code Number
AVI 303
AV2 302
AV3 30l
DVD Player DVD 751
If you have video equipment other than Sony brand that you want to control
with the projection TV's remote control, use the following procedures to
program the remote control.
=====:::=_ L_J_===:=z=
II F®® ®]
I I® ® ®1--4
IL
From the "Manufacturer's Codes" listed on page 70, select the three-digit
code number for the manufacturer's code for your component. If more than
one code number is listed, start with the number listed first. Use the code
number to complete the following procedure.
To program a cable box or a satellite receiver
l Open the panel of the remote control.
2 Press CODE SETinside the panel.
3 Close the panel and press SAT/CABLE (FUNCTON).
4 Enter the three-digit manufacturer's code number using the 0-9 buttons.
5 Press ENTER.
6 To check if the code number works, aim the projection TV's remote
control at the component and press the green POWER button that
corresponds with that component. If it responds, the programming is
completed. If not, try using the other codes listed for that manufacturer.
68