Sony KP-51WS500 Operating Instructions Manual page 24

Installing and Connecting the Projection TV
Connecting a Satellite Receiver with a VCR
Disconnect all power sources before making any connections.
1
Connect the satellite antenna cable to the satellite receiver's
SATELLITE IN jack.
2
3
4
5
Connect the CATV cable to the VCR's VHF/UHF IN jack.
Using a coaxial cable, connect the VCR's OUT jack to the projection
TV's VHF/UHF jack.
Using AUDIO and S VIDEO cables, connect the satellite receiver's
AUDIO and S VIDEO OUT jacks to the VCR's AUDIO and S VIDEO
IN jacks.
Using AUDIO and S VIDEO cables, connect the VCR's AUDIO and S
VIDEO OUT jacks to the TV's AUDIO and S VIDEO IN jacks.
VMC-810S/820S
(not supplied)
-- s VIDEO
@
@@
@@
,__L_
-- YC-15V/30V (not supplied)
6
TO
Coaxial
cable VHF/UHF
Rear of projection TV
_ Satellite
antenna
Satellite receiver cable
VItF/Ij_ F SATFJ- _U_
(not supplied)- 820S (not
supplied)
VCR
4
24