Sony KV-27V26 Operating Instructions Manual page 24

i_ AclJU._m9 yuu_ ._1:1 UP (muHu:_) (CuilCmuud)
._ Using the AUDIO menu
Sliders
For detailed information on using the remote
to modify menu settings, refer to "Learning
menu selection" on page 18.
To select the AUDIO ._ menu:
Display _ Highlight I_ _ Select
MENU _
To restore the factory settings
Press RESET on the remote control while the
AUDIO menu is displayed.
Tip "_"
Press (_ for direct selection of an EFFECT setting.
TREBLE
Sound Adjustment
Adjust slider left (cursor down) to decrease higher pitched sounds,
Adjust slider right (cursor up) to increase higher pitched sounds.
BASS Adjust slider left (cursor down) to decrease low pitched sounds.
Sound Adjustment Adjust slider right (cursor up) to increase low pitched sounds.
Adjust slider left (cursor down) to emphasize left speaker volume.
Adjust slider right (cursor up) to emphasize right speaker volume.
BALANCE
Sound Adjustment
EFFECT
Customize sound
effect based on the
program's audio type.
MTS
Enjoy stereo,
bilingual and mono
programs.
SURROUND: Simulates theaterquality sound (only for stereo programs). (KV-27S26, 27S36
29RS26, 29RS26C, 32S26, 32S36, 32TW26, 34RS26C, 35S26, 35S36, 37RS26 only)
SRS: Produces a dynamic three dimensional sound for stereo or encoded audio
signals. (KV-27V26, 27V36, 29V36C, 29V66M, 29V76M, 32V26, 32V36,
34V36C, 35V36, 35V76, 37V36M only)
SIMULATED: Adds a surround-like effect to mono programs. (KV-27V26, 27V36,
29V36C, 29V66M, 29V76M, 32V26, 32V36, 34V36C, 35V36, 35V76, 37V36M only)
STEREO: Select for stereo reception when viewing a program broadcast in stereo.
SAP: Select to listen to bilingual broadcast. (non-SAP programs will be muted
when this feature is selected)
MONO: Select for mono reception. (use to reduce noise during stereo broadcasts)
Quick MTS access: Press MTS on your remote to cycle through the MTS options
as follows: (STEREO ,_ SAP ._ MONO ._ STEREO)
SPEAKER ON: Select to listen to the sound from the "FV speakers and a separate stereo system.
Custom selection of OFF: Select to turn off the TV speakers and listen to the TV's sound only through
audio output source, external audio system speakers.
AUDIO OUT
Easy control of
volume adjustments.
AUDIO OUT can only be set when speakers are set to OFF.
VARIABLE: Sound output varies according to the TV settings. Volume, Bass,
Treble, and Balance are adjusted through the TV. Useful when you want to use
your remote to control the output of a separate audio system.
FIXED: Sound output is held at a fixed level. Volume, Bass, Treble, and Balance are fixe(
to the factory settings. Volume adjustments are made through your stereo.
20