Sony KV-27V26 Operating Instructions Manual page 12

.o Je¢ting d Jd Ins alling I V
(cunrlnued)
Disconnect all power sources before making any connection
Connecting two VCRs for tape
editing using MONITOR OUT
• KV-27V26, 27V36, 29V36C, 29V66M, 29V76M,
32V26, 32V36, 34V36C, 35V36, 35V76, 37V36M only
MONITOR OUT gives you the ability to use a
second VCR to record a program being played
by the primary VCR or to perform tape
editing and dubbing.
1 Connect the VCR intended for playback
using the setup instructions on page 4 of
this manual.
2 Using AUDIO/VIDEO connectors,
connect AUDIO and VIDEO IN on your
VCR intended for recording to MONITOR
AUDIO and VIDEO OUT on your TV.
(Rear of TV)
VCR (for playback)
AUO_O R AUD_ VlOEO I
J
I
VMC-810S/820S (not supplied)
VCR/,for recording)
_E _N
2 AUDIO-/lwhite)
AUDIO-R (red)
VMC-810S/820S (not supplied)
Notes:
• Do not change the input signal while
editing through MONITOR OUT.
• When connecting a single VCR to the TV;
if VCR LINE OUT is connected to TV
VIDEO IN, do not connect the TV
MONITOR OUT jacks to the VCR LINE
INPUT (see right). Doing so will cause
program interference and other viewing
problems.
VCR
(Rear of TV)
Indicates direction
of signal