Sony KV-27V26 Operating Instructions Manual page 13

Using the S-Link function
• KV-27V26, 27V36, 29V36C, 29V66M, 29V76M, 32V260
32V36, 34V36C, 35V36, 35V760 37V36M only
S-Link is a Sony innovation designed to make
your Sony components work together. It allows
you to automatically switch theTV input mode
to video when you press PLAY on your SonyS-
Link VCR. It also allows you to turn the VCR
and TV off at the same time with the SYSTEM
OFF button.
1 Connect your VCR using the setup
instructions on page 4 of this manual.
2 Using an S-Link connector, connect the
S-LINK jacks on your VCR and TV. Ensure
that both ends are seated firmly and that the
TV S-LINK connector is in the same row as
the AUDIO/VIDEO connectors.
Connecting a camcorder
• KV-27V26, 27V36, 29V36C, 29V66M, 29V76M, 32V260
32V36, 34V36C, 35V36, 35V76, 37V36M only
This connection is convenient for viewing a
picture directly from your camcorder.
UsinR AUDIO/VIDEO connectors, connect
AUD'IO and VIDEO OUT on your camcorder to
AUDIO and VIDEO IN on the front panel ot your
TV (Yellow-VIDEO, White-AUDIO Left, Red-
AUDIO Right).
Note:
• If you are connecting a monoaural camcorder, connect only
the single audio output to the left input on your TV.
Disconnect all power sources before making any connections.
AUDIO-L (white) S-LINK
VIDEO (yellow) (black)
I
Audio/Video Cable
(not supplied) 2
(Rear of TV)
(Front of KV-32V36, 34V36C,
35V36, 35V76, 37V36M)
I If you have an S Video equipped camcorder,
you can use an S Video connection for
optimum picture quality.
VIDEO(yellow)-_ _._-- AUDIO-R(red)
AV output VMC.810S/820S_._AUDIO-L (white)
_ _.(n°t sulpplied) j
9