Maintenance Maintenance Schedule; Rider Maintenance - Snapper Axion 150Z Series Operator's Manual

MAINTENANCE SCHEDULE
The following schedules should be followed for normal care of your rider and mower.
RIDER MAINTENANCE, All Models
Before Spring 8 25 100 200 Yearly
Each Use &Fall Hours Hours Hours Hours
Clean Debris from Rider and Engine Compartment * •
Clean Debris from Engine Cooling Areas & Air Filter * •
Check Tire Pressure •
Lubricate Rider & Mower * •
Clean Deck & Check/Replace Mower Blades •
Clean Battery & Cables •
Check Rider Safety System ** • • •
Check / Adjust PTO Clutch •
ENGINE MAINTENANCE,
8 Hours 25 Hours 50 Hours 100 Hours 100-400
i or Every or Every or Every Hours
24HP Briggs & Stratton
or Daily '
Season Season Season
Check Engine Oil Level * •
Replace Air Filter * •
Change Oil * •
8ie_nCooiingFins *
Replace Spark Plugs •
Replace Fuel Filter 1 •
Clean Combustion Chamber •
* More often in hot (over 85 ° F: 30 ° C) weather or dusty operating conditions.
** Check the function of the safety system after the unit has been stored for 30 days or longer,
1 These services should be performed by your local authorized dealer,
15