Sharp AQUOS LC-46LE835U Operation Manual page 82

Appendix
Problem
o No picture
o Picture quality of HD programs is
poor.
o The TV sometimes makes a
cracking sound.
The original home page cannot
be displayed.
• Some Internet functions used on a
PC are not available from the TV.
Possible Solution
o Is connection to other components correct? =_ Pages 14 to 18 and 58
Is the correct input selected? =_ Pages 14 and 23
o Is "On" selected in "Audio Only"? • Page 31
If the PC image is not displayed, check the following:
- When connecting a laptop PC to the TV, check that display output mode of the
PC is set to external monitor.
- Check the resolution setting on the PC. Is a non-compatible signal being input?
,_ Page 63
To enjoy HD images from external equipment, you are required to set up HDMI
connection or component connection.
o If the program content is not of HD quality, HD images cannot be displayed. Check
that the program you are viewing provides HD images.
o The HD cable/satellite set-top box may need to be configured to output HD images
via cable/satellite.
o The cable/satellite broadcast may not support a signal resolution of 1080p.
o This is not a malfunction. This happens when the cabinet slightly expands and contracts
according to change in temperature. This does not affect the TV's performance.
Is the ETHERNET cable connected correctly? _ Page 66
Check the settings of "lnternet Setup". =_ Pages 68 to 69
The TV has only limited functions compared with regular PC browsers. _ Page 71
Problem
3D images are not displayed.
Possible Solution
o Is "3D Auto Change" set to "No"? Press 3D to switch to 3D mode. _ Page 45
o If "3D Auto Change" is set to "Yes" but no 3D images are displayed, check the display
format of the content being viewed. Some 3D image signals may not be recognized as 3D
images automatically. Press 3D to select the appropriate display format for the 3D image.
=_Pages 43 to 44
Is the power of the 3D Glasses turned on?
Are the 3D Glasses set to 2D mode?
Is there an obstacle between the 3D Glasses and the TV, or is something covering
the infrared receiver on the 3D Glasses? The 3D Glasses operate by receiving a
signal from the TV. Do not place anything between the 3D infrared emitter on the TV
and the infrared receiver on the 3D Glasses. =_ Page 12
For further details, refer to the operation manual of your 3D Glasses.
The example of an error message
displayed on a screen
o Failed to receive broadcast.
No broadcast now.
An incompatible audio signal has
been received. Change the output
device audio settings to PCM.
Error code Possible Solution
E202 o Check the antenna cable. Check that the antenna is correctly setup.
E203 o Check the broadcast time in the program guide.
o This message is displayed when an audio format other than PCM
is input. (Dolby Digital and DTS audio formats are not supported.)
- Set the audio output format of connected external HDMI
equipment to PCM.
- Refer to the operation manual of the external equipment for
setting details.
Q- 80