Sharp AQUOS LC-46LE835U Operation Manual page 31

On=Screen Display Menu
You can set the color gamut range.
Standard" Standard color gamut.
Expanded: More vivid colors with expanded color gamut.
o "Color Gamut Range" is only available when AV MODE is
set to "MOVIE" or "MOVIE (3D)".
For a better white balance, use color temperature correction.
High: White with bluish tone
Mid-High:
Middle:
Mid-Low:
Low: White with reddish tone
White balance can be adjusted between a maximum of
4-30 and a minimum of -30 for each color temperature.
R Gain (LO/HI): -30 through +30
G Gain (LO/HI): -30 through +30
B Gain (LO/HI): -30 through +30
Fine tuning the color temperature
To fine tune the color temperature, set "10 Point Setting"
to "On".
You can adjust the "Position" setting. Adjust the set color
temperature from +1 to +10.
White balance can be adjusted between a maximum of
+30 and a minimum of -30 for each color temperature.
• When "Position" is set to "10", you can adjust the white
balance between -30 and 0.
= For resetting all adjustment items to the factory preset
values, press A/T to select "Reset", and then press
ENTER.
Use Motion Enhancement to view fast-action video
more clearly.
AquoMotion240: Turns the LED scanning backlight on
or off to display motion picture more smoothly and
clearly.
120Hz High/120Hz Low: For obtaining a clearer image.
Off: Normal image.
o "Motion Enhancement" may cause image noise. If this
occurs, turn the function "Off".
o When AV MODE is set to "GAME" or "PC", or PC format is
being input, "Motion Enhancement" is not available.
Enables smoother diagonal line by detailed dot control.
On: Produces smooth diagonalline.
Off: No adjustment.
Automatically adjusts the image contrast according to
the scene.
On: Automaticallyadjusts the image contrast.
Off: No adjustment.
Adjusts the differences of picture tones between bright
parts and dark parts. The adjustment range of the
gamma can be set to a maximum of 4-2and a minimum
of-2 by pressing 4 or I_.
Adjusts on-screen black level to your preferred level.
High: The black level gets brighter.
Low: The black level gets darker.
= "Black Level" is available for input signal from Composite
Video, Component 480i and analog broadcasts (air and
cable).
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then recreates
each still film frame for high-definition picture quality.
Advanced(High)/Advanced{Low): Select a desired level
to remove jerkiness from film contents.
Standard: Detects, analyzes, converts film source.
Off: Normal viewing mode.
= "Film Mode" does not function depending on input signal
type.
= "Standard" does not function when channel display shows
an input signal resolution of 480p, 720p, or 1080p.
= "Film Mode" is not available during PC format input.
= "Advanced(High)" and "Advanced(Low)" do not function
when you set AV MODE to "PC".
Produces a clearer video image.
Auto: Automatically adjusts the level of noise reduction.
High/Middle/Low: Select a desired level for viewing a
clearer video image.
Off: No adjustment.
o "Digital Noise Reduction" is not available when you set AV
MODE to "PC" or PC format is being input.
o When AV MODE is set to "GAME", "Auto" is not available.
For viewing a video in monochrome.
On: For viewing in monochrome.
Off: Normal color.
The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to
a maximum of 4-16 and a minimum of -16.
Max.: -15 through +16
Min.: -16 through +15
= The "Range of OPC" settings are active only when "OPC"
is set to "On".
= The maximum setting cannot be set to a smaller number
than the minimum setting.
= The minimum setting cannot be set to a bigger number
than the maximum setting.
= Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
Q- 29