Sharp AQUOS LC-46LE835U Operation Manual page 45

Enjoying 3D image Viewing
APPS
The TV screen may temporarily become black when the TV
is trying to detect a 3D image signal and when switching
from 3D to 2D mode.
4 Press 3D during the 3D mode.
Select "Yes" and press ENTER to switch to 2D
mode.
• Take off the 3D Glasses and turn off the power.
ai i :wJ
5 Take off the 3D Glasses and turn off the power.
The image signal may contain a 3D identification
signal. You can enable the TV to automatically detect
the 3D image type by selecting "System Options" > "3D
Setup" > "3D Auto Change" on the TV. (See page 45.)
1 When "3D Auto Change" is set to "Yes"
• The 3D imagetype is detected automaticallyand the
appropriate 3D image is displayed.
If the input signal switches to 2D, 2D images are displayed
automatically.
3D mode is canceled automatically when the setting is
changed, input selection is changed, or the power is
turned off.
1 Press 3D.
o A screen appears prompting you to select between 3D
and 2D image viewing.
When "3D Auto Change" is set to "No"
• The following messageis displayed. Press3D.
2 Press 4/_ to select "3D" or "2D", and then press
ENTER.
o To view in 3D mode: Select"3D", and then go to step 3.
o To view in 2D mode: Select"2D", and then go to step 6.
3 Press 4/1_ to select the 3D signal type ( "2D_3D",
"Side by Side" or "Top and Bottom") and then press
ENTER.
• Press 41/_ to select the "Yes", and then press ENTER.
2 Turn on the 3D Glasses and place them on your
head.
3 You can now view 3D images.
o Ifyou select the same system as that of the input signal,
3D images are displayed.
4 Turn on the 3D Glasses and place them on your
head.
5 You can now view 3D images.
Q- 43