Input Label; Sleep Timer - Sharp AQUOS LC-65D64U Operation Manual

Useful adjustment settings
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display.
INPUT
FLASHBACK
@©
VOL OH
FREEZE MENU
0 @
_ R_N
Press INPUT to select the desired input
source.
Press MENU to display the MENU screen, and
then press _11/_ to select "Setup".
Press A/Y to select "Input Label", and then
press ENTER.
Press A/Y/4/_ to select the new name for
the input mode, and then press ENTER,
Example
Allows you to set a time when the TV automatically
switches to standby.
SLEEP AUDIO AVMODE CC
_ C] CD C]
Press SLEEP.
" The remaining time displays when the sleep timer
has been set.
I Sleep Timer: Remaining 30 •
Each time you press SLEEP, the remaining
time switches as shown below.
,, When set, the time automatically starts counting
down.
• If you want to adjust the sleep timer, you can
press SLEEP twice then change the time setting.
® Five minutes before the time expires, the
remaining time displays every minute.
[Z iZ]"I s 0 I-IG01
Select "Off" by pressing SLEEP to cancel the sleep timer.
., The TV will enter standby when the remaining time reaches
zero.
• When the sleep timer is set, its indicator on the TV lights
red.
Press MENU to exit.
• You cannot change labels if the iNPUT SOURCE is TV.
Q- 34