Basic Adjustment Settings - Sharp AQUOS LC-65D64U Operation Manual

Basic adjustment settings
[] Using the remote control
Use the following buttons on the remote control to
operate the menu.
FREEZE MENU
0 o
-- FAVORITE OH --
@@@@
MENU: Press to open or close the menu screen.
A/T/_I/_: Press to select a desired item on the
screen or adjust a selected item.
ENTER: Press to go to the next step or complete
the setting,
RETURN: Press to return to the previous step.
I the rem_ will change in I
[ accordance with each menu setting screen. J
[] Using the control panel of the main unit
You can also operate the menu with the control panel
of the main unit.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
m
PowE_
0
_E_u
@
INPUT
@
cM
@A
@ v
vo_
@+
i
MENU: MENU on the remote control.
INPUT: ENTER on the remote control.
ON A/V: Cursor _,/Y on the remote control.
VOL +/-: Cursor _/_ on the remote control.
Example
Option
®
@
Itern displayed in yellow
• This indicates the item currently selected.
., Press ENTER to go to the adjustment screen for this
item.
Itern in brackets
• This indicates the current setting for the item.
Item displayed in white
.' This indicates an item can be selected.
Item displayed in gray
• This indicates that the item cannot be selected.
There are various reasons why items cannot be
selected, but the main reasons are as follows:
-- Nothing is connected to the selected input terminal.
--The function is not compatible with the current input
signal.
• Menu options differ in the selected input modes, but the
operating procedures are the same.
., The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
Q- 21