Resetting The Picture Settings To The Factory Defaults; Viewing Picture-In-Picture - Samsung PN50A550S1FXZA User Manual

Resetting the Picture Settings to the Factory Defaults
1 To select the desired picture mode, follow the Changing the Picture Standard
instructions numbers 1 and 2. (see page 23)
2 Press the & or _' button to select Picture Reset, then press the ENTER button.
Press the 4 or !1_button to select OK or Cancel then press the ENTER button.
Press the EXiT button to exit.
Each mode can be reset.
Viewing Picture=in-Picture
You can use the PiP feature to simultaneously watch the TV tuner (analog broadcasts only) and one external
video source. (See page 40 to select the PIP picture sound.)
This product has one built-in tuner, which does not allow PiP to function in the same mode.
Please see 'PiP Settings' below for details.
While V-Chip (See page 57) is in operation, the PIP function cannot be used.
Activating Picture-in-Picture
1 Press the MENU button to display the menu.
Press the A or _' button to select Setup, then press the ENTER button.
Press the A or _' button to select PIP, then press the ENTER button.
Press the ENTER button again.
Press the A or _' button to setect On, then press the ENTER button.
_-- If you turn the TV off while watching in PIP mode and turn it on again, the
PIP window witl disappear.
You can view Analog TV broadcasts on the PIP screen (sub-picture) when
the main picture is from an external device connected to HDMI 1,HDMI/DVI
2, HDMI 3, Component 1, 2 or PC.
PiP Settings
Main picture Sub picture
Component 1,2
HDMI 1, HDMI/DVl 2, HDMI 3 Analog TV broadcasts only
PC
the Size of the PiP Window
Press the A or T button to select Size, then press the ENTER button.
Press the A or _ button to select the desired size of the PIP window, then press
the ENTER button.
You may notice that the picture in the PIP window becomes slightly
unnatural when you use the main picture to view a game or karaoke.
Continued...