Table of Contents
Advertisement
− White: This function helps remove after images on the screen by changing the colour of pixels
to white. Use this function when there are remaining after images or symbols on the screen
especially when you displayed a still image on the screen for a long time.
− Scrolling: This function helps remove after images on the screen by moving all the pixels on the
PDP according to a pattern. Use this function when there are remaining after images or symbols
on the screen especially when you displayed a still image on the screen for a long time.
− Side Gray: When you watch TV with the screen ratio of 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme left and right sides.
Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.
Light: When you set the screen ratio to 4:3, it brightens the left and right sides.
➢
To remove after images on the screen, use either White or Scrolling function. Although both of
the two functions remove after images on the screen, Scrolling is more effective.
➢
The after image removal function has to be executed for a long time (approximately 1 hour) to
effectively remove after images on the screen. If after image is not improved after the execution
of the function, repeat the function again.
➢
Press any button on the remote control to cancel this feature.
Resetting the Picture Settings to the Factory Defaults
You can set detailed picture settings.
1
Press the MENU button to display the menu.
Press the ENTER button to select Picture.
Press the ▲ or ▼ button to select Reset, then press the
ENTER button.
4
Press the ▲ or ▼ button to select OK or Cancel then press
the ENTER button.
➢
Each mode can be reset.
Sound Features
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Sound, then press the
ENTER button.
Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
Available options: Mode, Equalizer, SRS TS XT, Auto Volume,
TV Speaker, Sound Select
4
When you are satisfied with your setting, press the ENTER
button.
5
Press the EXIT button to exit.
Mode: Standard/Music/Movie/Speech/Custom
You can select the type of special sound effect to be used when watching a given broadcast.
➢
Choose Standard for the TV standard factory settings.
Choose Music when watching the music videos or concerts.
Choose Movie when watching movies.
Choose Speech when watching a show that is mostly dialog(i.e., news).
Choose Custom to recall your personalized settings.
Easy Setting
1 Press the TOOLS button on the remote control.
Press the ▲ or ▼ button to select Sound Mode.
Press the ◄ or ► button to select the required option.
4 Press the EXIT or TOOLS button to exit.
English - 0
T V
Picture
More
Picture Options
Reset
:
OK
Move
Enter
T V
Sound
Mode
: Custom
Equalizer
SRS TS XT
: Off
Auto Volume
: Off
TV Speaker
: On
Sound Select
:
Main
Move
Enter
Tools
Anynet+ (HDMI-CEC)
Picture Mode
:
Standard
Sound Mode
◄
Custom
Sleep Timer
:
SRS TS XT
:
Energy Saving
:
Dual I-II
:
Move
Adjust
Continued...
OK
Cancel
Return
Return
►
Off
Off
Off
Mono
Exit
Advertisement
Table of Contents
