Viewing Closed Captions (On-Screen Text Messages) -Analog - Samsung PN50A550S1FXZA User Manual

Viewing Closed Captions (On-Screen Text Messages) -Analog
The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an
external device. (Depending on the broadcasting signal, the Analog Caption function may operate on digital
channels.)
1 Press the MENU button to display the menu.
Press the _, or _' button to select Setup, then press the ENTER button.
2 Press the _, or _' button to select Caption, then press the ENTER button.
3 Press the ENTER button to select Caption.
Press the _, or _' button to select On, then press the ENTER button.
Press the A or '_' button to select Caption Mode, then press the ENTER
button. Press the & or T button to select submenu (Default, 0C1~C04 or
Textl~Text4) you want, then press the ENTER button.
Press the EXiT button to exit.
,, The defa_ t is Default
, CCt: The Primary Synchronous Capuon Service. These are captions in the
primary language thai must be _nsync with the soune, preferably matched to a
specific frame
, CC2: The Special Non-Synchronous Use Captions.This channet carries data thai
IS lntenoeo [o augment _nformatlon carried in the program.
. CC3: Secondary S_nchronous Caption Service.
Alterna[e program-related caption data, typically second language capuons.
* CC4: Special Non-Synchronous Use Captions. Similar to CC2.
. Text1 : First Text Service. This may De various non-program related data
. Text2: Second Text Service. Additional da[a usua W no[ program rela[ea.
. Text3rrext4: Third and Fourth Text Services. These data channels should be
used only if Text1 and Text2 are not sufficient
_,_ . The Caption feature doesn't work in COMPONENT, PC, HDMI(DVI)
modes.
. The availability of captions depends on the program being broadcast.
You can also press the CC button on the remote control to select Captions
On or Off.