troLAbeshootna
Connecting
to a computer
The
compute
does
nol: recognlse
j our camcorder.
Cannot p_ay a video file properly on
a PC.
inte
-StUdIO does noI TURCI.ION
propen_
_ntelli-studio is no! performed.
l he image
or sound
on your
camcorder
is not played
on your
computer
propeny.
The
playDBCK
scre@n
Is DaUSeO
or
dlszor[ed,
•
Disconnect the USB cable from the computer and camcorder,
restart the computer, then connect it again correctly,
• A video codec is needed to play the file recorded on your
camcorder,
Install the seffware provided with your camcorder,
_page
114
•
Make sure you insert the connector
in the correct direction, and
connect the USB cable to the USB jack on your camcorder firmly,
•
Disconnect the cable from the computer and camcorder, restart
the computer, Cennect it again properly.
•
Tb play back an HD video file, a computer with better specification
Jsrequired.
Check a computer with recommended
specification,
_page
109
-
Exit the Intelli--studio application, and restart the Windows
computer.
Set PC Seffware to On in the Settings menu or install Intelli--studio
in the computer.
_pages
83, 114
- Video playback or sound may stop temporarily depending on your
corrlputer. The video or sound copied to your computer is not
affected,
-
If your camcorder
is connected
to a computer that does not
support Hi--speed USB (USB2.0), the image or sound may not be
played correctly, The image and sound copied to your computer
are not afflicted,
o
o
o
Check the system requirements to play a video.
Exit other all applicalions
running on the current computer,
If a recorded video is played on your camcorder
connected
to a
corrlputer, the image may not play smoothly, depending on the
transfer speed, Please copy the file to your PC, and then play it
back,