1. Connect the provided component/AV cable to the composite jack, Video and L-R (Audio)
on TV. Use the blue plug with the yellow label to connect to the Video input on your TV.
•
After the connection is complete, check the desired TV out method by setting "Analogue
TV Out" to "Composite."
_-,page 85
2. Turn on your TV and set the W's input selector to the Input your camcorder is connected
to.
•
This is often referred to as "line."
•
Refer to the TV's instruction manual to see how to select the TV input.
Camcorder
RegularTV
Oomaonent/AVcable
OOmDOSKe oonnectlor
If the PB, PR, or Y jack is connected
incorrectly, the IV screen may appear red or blue.
• Check the connection status between the HD camcorder and IV, the 'FV screen may not deliw_r
the right video information if connected
incorrectly.
• When the camcorder
is connected
to a IV with more than one cable, the output signal is followed
in the order of priority: HDMI -* corrlponent/AV
output.
•
Do not use excessive force when corlrlecting the cables.
•
For more information about the TV connection jack and the connecting method, rder to the TV
user manual.
•
Following method Type B above, the blue plug may not match the Video input on your TV due to
the VIDEO input being labelled diff_rently. Sometimes the IV has a Y input jack instead of WDEO.
105