Samsung HMX-H200BP User Manual page 59

PLayback on other devices (TV, etc.)
YOU cannot view [ne IRI8 #e or hear
l:ne sound from the connected
clev De,
Fhe [Rage appears alstor[ea on a
TV.
You cannot view IRe Im8 ]e or near
_ne sound from a TV connec[ea
using the HDMI cable.
• Connect the audio of the component/AV cable to your camcorder
or connected device (FV, HD recorder, etc.).
(Red colour- right, White colour- left)
• The connection cable (component/AV cable) is not conneeted
properly. Make sure that the connection cable is connected to the
proper jack. _ pages 103~ 104
• When you are using the component/AV cable, make sure the red
and white plugs of your component/AV cable are connected.
'.-,pages 103~104
- This camcorder does not support the audio output signal when the
camcorder is connected with lM in the record mode. The audio
output signal is supported as long as the camcorder is connected
in the vide() playbaek mode. This is not an error,
This phenomenon is caused by connecting to the IV with 4:3
aspect ratio.
Images will not be output from the HDMI jack if the material is
copyright protected.
Connecting/Dubbing with other devices (Recorder, PC, Printer, etc.)
You Cannot dub cQrrect!y using th_
HDMI cable, - You cannot dub images using the HDMI cable.
- The eomponent/AV cable is not connected properly. Make sure
that the component/AV cable is conneeted to the proper jack, i.e.
component/AV cable, to the input jaek of the deviee used for dubbing images from your
camcorder. "-,page 107
Printouts ganno[ be made using a " Your printer may not print images edited ors a computer or
PictBridge printer, recorded using other deviee. This is not an error.
125