Remote Control - Samsung LN-T4071F Owner's Instructions Manual

Remote Control
You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the
TV. You can also use your remote control to operate your VCR, Cable box, DVD player or Cable Box/Satellite receiver
(Set-Top Box)
O POWER _) SOURCE
Turns the TV on and off. Press to display all of the available
video sources.
NUMERIC BUTTONS
Press to change the channel. _) PRE-CH
_ Tunes to the previous channel.
Pressto select additional channels(digital _ WtSBLINK
and analog) being broadcast by the same
station. For example_ to select channel
"54-3"_ press "54", then press "-" and "3".
_]P CH LIST
Used to display Channel Lists on the
screen.
ANTENNA
Press to select "AIR" or "CABLE".
VCR/DVD Functions
- Rewind
- Stop
- Play/Pause
- Fast/Forward
VOL(_/VOLQ
Press to increase or decrease the
volume.
=_(MUTE)
Press to temporarily cut off the soued.
MENU
Displays the main on-screen menu.
S.MODE
Press to select the sound mode.
RETURN
Returns to the previous menu.
_) RMODE
Press to select the picture mode.
_) CAPTION
Controls the caption decoder. _)
_) FAV.CN
Press to switch to your favorite channels.
SLEEP
Press to select a preset tilne interval
for automatic Shut off.
SRS
Selects SRS TruSurround XT mode.
_1 SET
Sets the remote to control your
TV, VCR, Cable, DVD or Set-Top Box
_) TV, DVD, STB, CABLE, VCR
Press to operate your TV, DVD, STB,
CABLE (box) or VCR
(See pages 17-21)
_) When pressing this button, a number
of buttons on the remote control (e.g.
TV, DVD, STB, CABLE, VCR,
VOL and CH buttons) light up for a few
seconds and then turn off to save
power. This function is convenient for
using the remote at night or when dark.
This function enables you to view and
play photo (JPEG) and audio files
(MP3) from an external device.
(Refer to pages 66 (JPEG) and 73
(MR3))
L_) REC
This remote can be used to control
recording on Samsung DVD recorders
with the Anynet feature.
(Refer to page 79)
CH® /ca®
Press to change channels.
i_) EXIT
Press to exit the menu.
_) UP,& ! DOWN_ ! LEFT',_ /
RIGHTi_. / ENTER_
Use to select on-screen menu items
and change menu values.
INFO
Press to display information on the TV
screen.
_) Anynet*
Runs the Anynet + functions and sets
up Anynet devices.
_) STILL
Press to stop the action during a
particular scene.
Press again to resume normal video.
P.SIZE
Picture size selection.
PiP
Picture-in Picture ON/OFF
_)CH ^Iv
Displays the available channels in
sequence (These buttons change
channels in the PIP window only.)
t_) MTS
Press to choose stereo, mono or
Separate Audio Program
(SAP broadcast).
_} RESET
When your remote does not work,
chER'_ge the batteries and press the
RESET button for 2-3 seconds before
use.
:_ This is a special remote control for the visually impaired and has Braille
points on the POWER, CH, VOL, STOP and PLAY/PAUSE buttons.
The performance of the remote control may be affected by bright light.