Picture Control
Using Automatic Picture Settings
Your TV has Three automatic picture settings ("Dynamic", "Standard" and "Movie") that are preset at the factory.
You can activate either Dynamic_ Standard, Movie by making a selection from the menu.
t,
Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2.
Press the ENTER button to select "Mode".
Press the A or T button to select the "Dynamic", "Standard", "Movie" picture
setting. Press the ENTER button.
_'ChooseDynamicto increasetheCtarity and sharpness of thepicture.
_'ChooseStandardfor the standardfactorysettings.
ChooseMoviefor a naturalimagewithoutpictureenhancements.
3,
Press the A or V button to select "Contrast", "Brightness", "Sharpness",
"Color", "Tint(G/R)" or "Backlight", then press the ENTER button.
4.
Press the 4 or I,_button to decrease or increase the value of a particular item.
For example, if you select "Contrast", pressing the I,- button increases it.
Press the ENTER button.
Press the EXIT button to exit.
When you make changes to "Contrast", "Brightness", "Sharpness",
"Color", "Tint(G/R)" or "Backlight", the OSD will be adjusted accordingly.
:_ When in PC mode, TinL Sharpness and Color are not available.
:_ Each adjusted setting wilt be stored separately according to its input mode.
[_JPress the P.MODE button on the remote control repeatedly to select the desired
picture mode.
t2)
L)
L)
_MODE
S,_
STILL
P, S IZE