Table of Contents
Advertisement
Labeling Channels
Channels can be labeled so that their call letters appear whenever the channet is selected.
t,
Press the MENU button to display the menu.
Press the A or _r button to select "Channel", then press the ENTER button.
Press the A or _' button to select "Name", then press the ENTER button,
2.
Press the A or • button to select the channel to be assigned a new name,
then press the ENTER button.
Press the A or T button to select a letter, a number or a blank (Results in this
sequence: A...Z, 0...9, +, -, *,/, blank).
Press the _ button to switch to the next field, which will be selected.
Select a second letter or digit by pressing the A or T button, as above.
Repeat the process to select the last three digits. When you have finished,
press the ENTER button to assign the new name.
To erase the assigned new name, select "Clear" by pressing the 4 or I,. button,
then press the ENTER button.
Press the EXIT button to exit.
:_ The names of digital broadcasting channels are automatically assigned and
thus cannot be assigned by users.
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a tow-noise preamplifier
boosts the incoming signal).
t,
Press the MENU button to display the menu.
Press the A or _r button to select "Channel", then press the ENTER button.
2,
Press the _, or T button to select "LNA", then press the ENTER
button,
3,
Press the A or T button to select 'On", then press the ENTER button,
Press the EXIT button to exit,
>_ LNA functions only when antenna is set to Air or Cable.
>_The LNA setting must be made separately for each channel.
If the picture is noisy with the LNA set to "On", select "Off".
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
