[] Turningthe Tv Onand 3Ff; [] =Lug& Play Feature - Samsung LN-T4071F Owner's Instructions Manual

Operation
Turning the TV On and Off
Press the POWERO button on the remote control.
You can also use the POWER(b button on the TV.
_I POWER
SOURC_
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently:
t=
Press the POWER button on the remote control.
The message "Menu language_Shop Mode, Channels and Time will be set." is
displayed.
Press the ENTER button, then "Select the language of the OSD" menu
is automatically displayed.
2, Press the A. or T button to select language, then press the ENTER button.
The message "Select Home Mode when installing this TV at home." is displayed.
3, Press the 4 or _,- button to select "Shop" or "Home"_then
press the ENTER button.
The message "Select the antennas to memorize.' is displayed.
We recommend setting the TV to Home mode for the best picture in your
home environment.
Shop mode is only intended for use in retail environments.
>_ If the unit is accidentally set to Shop mode and you want to return to Dynamic
(Home) mode, press any Volume button and then hold down the MENU button
for five seconds on the side panel of the TV.
4, Press the A or T button to memorize the channels of the selected connection.
Press the ENTER button to select "Start".
>_ If the antenna is connected to ANT 1(AIR), select "Air" and if it is connected to
ANT 2 (CABLE), select "Cable'.
:_ If both ANT 1 (AIR) and ANT 2 (CABLE) are connecte& select the 'Air + Cable".
:_ In Cable mode, you can select the correct signal source among STD_ HRC_
and IRC by pressing the A or T button, then press the ENTER button.
Contact your local cable company to identify the type of cable system that
exists in your particular area.
5, The TV wilt begin memorizing all of the available channels.
After alt the available channels are stored, the Auto program menu reappears.
Press the ENTER button when channel memorization is complete.
The message "Select the clock mode." is displayed.
To stop the search before it has finishe& press the ENTER button with stop
selected.
6, Pressthe ENTER button.
Press the A. or 'V button to select "Auto", then Press the ENTER button.
The message "Set to daylight savings time." is displayed.
If you select ' Manual'_ 'Set current date and time." is displayed. (See page 47)