Recording - Samsung LN26A450C1DXZA User Manual

Anynet ÷ Menu
The Anynet + menu changes depending on the type and status of the Anynet + devices connected to the TV.
View TV Switches from Anynet + to TV broadcast mode.
Record Starts a recording. (This menu works only for a device supporting recording.)
(Device_Name) Menu Shows the menu of the connected device.
Example: When a DVD Recorder is connected, the DVD Recorder's title menu appears.
(Device_Name) Operation Shows the play control menu of the connected device.
Example: When a DVD Recorder is connected, the play control menu of the DVD
Recorder appears.
Connect (Device_Name) Your TV connects to the corresponding device.
Receiver Sound is output through the receiver (home theater).
Setup You can set the Anynet ÷ (HDMI-CEC), auto turn off, and searching connections for
using Anynet +.
TV Remote Control Buttons Available in Anynet ÷ Mode
Device Type I Operating Status Available Buttons
After switching to the device, when the menu of the
corresponding device is displayed on the screen.
After switching to the device, while playing a file
Anynet + Device
Device with built-in Tuner After switching to the device, when you are watching a TV
program
Audio Device When Receiver is activated
Numeric buttons
A/T/4/I_/ENTER C:;M buttons
Color buttons
EXIT button
(Backward search)
(Forward search)
(Stop)
([[Z_ (Play) / (_Z) (Pause)
CH (_/(_ button
VOL (_/(_ button
MUTE button
>- The Anynet + function only works when the active source on the TV remote control is set to TV.
>- The _ button works only while in the recordable state.
>- You cannot control Anynet + devices using the buttons on the TV. You can control Anynet + devices only using the TV remote
control.
>_ The TV remote control may not work under certain conditions. In this case, reselect the Anynet + device.
>- The Anynet + functions do not operate with other manufacturers' products.
>_ The (Z_), _ operations may differ depending on the device.
Recording
You can make a recording of a TV program using a recorder.
Press the _ button.
Recording begins. (Only when the Anynet ÷ enabled recording device is connected.)
>- You can record the source streams by selecting "Record" after pressing the Anynet ÷ button.
>_ Pressing the ([_C) button will record whatever you are currently watching. If you are watching video from another device, the
video from the device is recorded.
>_ Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an
antenna to a recording device, refer to the recording devices users manual.