Connecting A Vcr - Samsung LN26A450C1DXZA User Manual

Connecting a VCR
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the
instructions on pages 7-8). Skip step 1 if you have not yet connected to an antenna or a cable system.
1, Unplug the cable or antenna
from the back of the TV.
2, Connect the cable or antenna to
the ANT IN terminal on the back
of the VCR.
1
1
1
Connect an RF Cable between
the ANT OUT terminal on the
VCR and the ANT IN terminal
on the TV.
Connect a Video Cable
between the VIDEO OUT jack
on the VCR and the AV IN 1
[YNIDEO] orAV IN 2 [VIDEO]
jack on the TV.
Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the AV
IN 1 (orAV IN 2)[R-AUDIO-L]
jacks on the TV.
>- If you have a "mono"
(non-stereo) VCR, use a
Y-connector (not supplied)
to hook up to the right and
left audio input jacks of the
TV. If your VCRis stereo,
you mustm connect two
cables.
TV Rear Panel
TV Side Panel
VCR Rear Panel
f
o
_ o°°
_ N
_ N
_ N
_ N
N _
Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape.
:_ Each VCR has a different back panel configuration.
>_ When connecting a VCR, match the color of the connection terminal to the cable.
>_ When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not
match the color of the video cable (Yellow).
S-Video Connection
Your Samsung TV can be connected to an S-Video jack on a VCR.
(This connection delivers a better picture when compared to the regular Video connection above.)
1
1
1
To begin, follow steps 1-3
in the previous section to
connect the antenna or
cable to your VCR and your
TV.
Connect an S-Video Cable
between the S-VIDEO OUT
jack on the VCR and the
AV IN 2 [S-VIDEO] jack on
the TV.
Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the
AV IN 2 [R-AUDIO-L] jacks
on the TV.
VCR Rear Panel
TV Rear Panel
_ RF Cable (Not supplied)
.2. S=Video Cable (Not supplied)
Audio Cable (Not supplied)
TV Side Panel
An S-Video cable may be included with a VCR. (If not, check your local electronics store.)
:_ Each VCR has a different back panel configuration.
>_ When connecting a VCR, match the color of the connection terminal to the cable.