[] Resetting Ihe Picture Settings To The Factory Defaults - Samsung LN26A450C1DXZA User Manual

Settinqthe Film Mode
The TV can be set to automatically sense and process film signals from all sources and
adjust the picture for optimum quality.
1, Follow the "Activating Picture Options" instructions numbers 1 and 2.
(Refer to page 29)
2, Press the A or T button to select "Film Mode", then press the ENTER E_ button.
1
Press the A or _' button to select "Off' or "Auto", then press the ENTER _ button.
Press the EXIT button to exit.
:_ "Film mode" is supported in TV, VIDEO, S-VIDEO, COMPONENT(480i/1080i)
and HDMI(480i/1080i).
Settinqthe Blue Only_ Mode
This function is forAY device measurement experts. This function displays the blue
signal only by removing the red and green signals from the video signal so as to provide
a Blue Filter effect that is used to adjust the Color and Tint of video equipment such as
DVD players, Home Theaters, etc.
Using this function, you can adjust the Color and Tint to preferred values appropriate to
the signal level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow
Color Bar Patterns, without using an additional Blue Filter.
1, Follow the "Activating Picture Options" instructions numbers 1 and 2.
(Refer to page 29).
2, Press the A or T button to select "Blue Only Mode", then press the ENTER
button.
1
Press the A or T button to select "Off' or "On", then press the ENTER C*-' button.
Press the EXIT button to exit.
>_ "Blue Only Mode" is available when the picture mode is set to "Movie" or
"Standard".
Resetting the Picture Settings to the Factory Defaults
1
1
Press the MENU button to display the menu.
Press the ENTER C_ button, to select "Picture".
Press the A or _' button to select "Reset", then press the ENTER _ button.
Press the A or T button to select "OK" or "Cancel" then press the ENTER C_
button.
Press the EXIT button to exit.
:_ Each mode can be reset.