Samsung LN-T4053H Owner's Instructions Manual page 87

ProbJem
Honzon_albars appear to flicker.
jl[[er or stammer on the image.
/ertlcaI oars appear to flicker
jitter or shimmer on the image.
Screen is
DlaOK
ana power
indicator Ilgn_
DllnKs
steaally
Adjust the Coarse tuning and then adjust the Fine tuning.
image is not stable ana ma_
appear to vibrate when you nave
a corr au[er connec[ed [o _ne PC
InPut.
Adjust the Coarse tuning and then adjust the Fine tuning.
On your computer check: Power, Signal Cable.
The TV is using its power management system.
Move the computer's mouse or press any key on the keyboard.
If the setting is not correct_ use your computer utility program to change the display settings.
> Your TV supports multiscan display functions within the following frequency domain:
Horizontal frequency (kHz)
Vertical frequency (Hz)
PC Maximum refresh rate
(at 60 Hz)
30~60
1360 x 768
image s not centered on the Adjust the horizontal and vertical position.
screen. The screen position must be adjusted on the output source (i.e. STB) with a digital signal.
If a still mageis alsptayed for When you need to leave the monitor unused for an extended period of time, adjust the
an extenaeaperiodof time. residual setungs so that the monitor automatically goes into energy saving mode or activates the
imagesor blurringmay appear, screen saver to display moving images..
The TFT LCD panel uses a panel consisting of sub pixels (3,147_264) which require sophisticated technology to produce. How-
ever_there may be few bright or dark pixels on the screen. These pixets will have no impact on the performance of the product.