Setting Up The Tv With Your Pc - Samsung LN-T4053H Owner's Instructions Manual

Setting up the TV with your PC
How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals the monitor receives.
The function also automatically fine-tunes the settings and adjusts the frequency values and positions.
>" This function does not work in DVI-Digital mode.
Press the MENU button to display the menu.
Press the A or T buttons to select "Setup", then press the ENTER button.
Press the A or T buttons to select 'PC', then press the ENTER button.
>-Change to the PC mode first.
2. Press the A or T buttons to select "Auto Adjustment",then press the ENTER button.
Press the EXIT button to exit.
Amd'usLtinthe Screen ualibz
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning
alone, then make the frequency adjustments to the utmost and fine tune again.(See page 45) After the noise has been reduced,
re-adjust the picture so that it is aligned on the center of the screen.
1. Press the MENU button to display the menu.
Press the A or T buttons to select "Setup", then press the ENTER button.
Press the A or T buttons to select "PC', then press the ENTER button.
:_ Change to the PC mode first.
2. Press the ENTER button to select 'Image Lock".
Press the A or • buttons to select "Coarse"or "Fine', then press the ENTER button.
Press the _ or _ buttons to adjust the screen quality.
>" Vertical stripes may appear or the picture may be blurry.
Press the ENTER button.
Press the EXIT button to exit.