Table of Contents
Advertisement
Wave level fader controls audio output level. You can pan the sound on the right
or left using panning fader right under the fader, below the panning fader, you can
find the MUTE button which you can mute audio channel output. Beside the Wave
level fader you will see the slider marked with output 1,2 and 3,4. This slider
controls and place 1,2 & 3,4 outputs as you want. If you go to FX Panel, you will
see 2 channels mode or 4 channels mode. This slider is enabled to use when you
choose 4 channles mode and let you control to route outputs where you want to
assign between output 1,2 and output 3,4.
3. Midi level fader
Controls output level of MIDI channels. Like Wave level fader, you can pan the
signal or assign output channels between output 1,2 and ouput 3,4.
4. Record level fader
You can adjust input level for recording with this fader.
5. FX Panel
This button calls up the FX panel, which allows you to set reverb, echo, chorus,
equalizer and V space.
6. Virt. channels
This switch calls up an additional window in which are located as many volume,
effect, pitch and panorama sliders as you selected wave playback drivers. With these
sliders you can mix and control the different wave channels that are used by various
programs.
7. Audio In
Pressing this button will call up Audio In window, which you can set input level and
effect return value for input signal like Echo, Reverb and Chorus.
8. Ed!son
When you press this button, Ed!son – sample editor, window will be appeared.
9. Setmanager
This button will call up font loader applet, Setmanager.
1 2
Advertisement
Table of Contents
