Table of Contents
Advertisement
The control panel is the central control unit of the WAMI BOX. It contains firstly
the analog mixer which mixes the various audio signals, and feeds them either to the
output or the synthesizer for further processing. Switching of the various signal
paths also takes place here: the signals are switched as required for the many varied
tasks of the WAMI BOX. When the WAMI BOX is started for the first time, the
mixer is in a games-compatible mode. In this mode the card is fully compatible with
Soundblaster, Soundblaster Pro and Windows Sound System. Using this setting,
DOS games can be played with GM/GS sounds or older FM sounds with effects,
four-channel playback and V space.
The card can also be fully reconfigured, however, for example to make hard disk
recordings of the best possible quality with digital inputs and outputs.
In addition, the control panel switches one of the two MIDI interfaces to the
game/MIDI port if the MIDI jacks on the front panel are not to be used for some
reason. Normally, however, MIDI routing should be set to OFF as the MIDI ports
cannot be used by the front and back panels simultaneously.
1. Master level fader
It controls overall (Wave, Midi and Record) level of the WaMi Box. Even if you
adjust level for each part, you can decrease overall level by lower down this fader.
When you press „MUTE" button under the fader, whole audio path will be muted
and you won't get any sound from WaMi Box.
2. Wave level fader
W
a
M
i
B
o
x
M
i
x
W
a
M
i
B
o
x
M
i
x
W
a
M
i
B
o
x
M
i
x
e
r
e
r
e
r
1 1
Advertisement
Table of Contents
