About The Rotate Toner Key - Epson Aculaser C1600 User Manual

About the Rotate Toner KEY

The Rotate Toner key allows you to switch the printer from normal operation mode to Change Toner
mode, Eject All Toner mode or Print Head Cleanup mode.
The mode that the printer enters depends on how long the Rotate Toner key is held down.
Length of time that the Rotate
Toner key is held down
Less than 5 seconds
5 to 9 seconds
More than 10 seconds
Note:
When the printer is switched to any of these operation modes, the magenta toner indicator lights up.
The Rotate Toner key is used in the following situations.
❏ When replacing a toner cartridge
❏ When removing all toner cartridges
❏ When cleaning the print head window
When replacing a toner cartridge
Press the Rotate Toner key.
The printer enters Change Toner mode.
Note:
❏ For details on replacing a toner cartridge, refer to "Replacing a Toner Cartridge" on page 39.
❏ To return to normal operation mode from Change Toner mode, press the Clear key.
When cleaning the print head window
Hold down the Rotate Toner key for 5 seconds to 9 seconds.
The printer enters Print Head Cleanup mode.
Mode that the printer enters
Change Toner mode
Print Head Cleanup mode
Eject All Toner mode
AcuLaser C1600 User's Guide
Indicators on the control panel
-
All indicators blink once after the key
has been held down for 5 seconds.
All indicators flash once after the key
has been held down for 10 seconds.
Introduction 11