Thick Stock; Envelope - Epson Aculaser C1600 User Manual

❏ Any other media that is not approved

Thick Stock

Paper thicker than 90 g/m2 (24 lb bond) is referred to as thick stock. Test all thick stock to ensure
acceptable performance and to ensure that the image does not shift.
You can print continuously with thick stock. However, this could affect the media feed, depending on
the media quality and printing environment. If problems occur, stop the continuous printing and
print one sheet at a time.
Capacity
Orientation
Driver Media Type
Weight
DO NOT use thick stock that is
❏ Mixed with any other media in the trays (as this will cause printer misfeeding)

Envelope

Print on the front (address) side only. Some parts of the envelope consist of three layers of paper—the
front, back, and flap. Anything printed in these layered regions may be lost or faded.
You can print continuously with envelope. However, this could affect the media feed, depending on
the media quality and printing environment. If problems occur, stop the continuous printing and
print one sheet at a time.
Capacity
Orientation
Driver Media Type
Tray 1 Up to 50 thick stock sheets, depending on their thickness
Face up
Thick Stock 1
Thick Stock 2
Thick Stock 1: 91 to 163 g/m2 (25 to 43.5 lb bond)
Thick Stock 2: 164 to 209 g/m2 (43.6 to 55.6 lb bond)
Tray 1 Up to 10 envelopes, depending on their thickness
Face up
Envelope
AcuLaser C1600 User's Guide
Media Handling 28