Table of Contents
Advertisement
Using the TV's Menu System
PICTURE
Go Back
Picture Preset
Bright . . .
Auto Color
Color Warmth
Normal . . .
Brightness
Contrast
Color
Sharpness
Tint
Tilt
SETUP
Go Back
Auto Ch. Search
. . .
List & Labels
. . .
Closed Caption
. . .
Auto Tuning
. . .
Language
English . . .
26
Graphics contained within this publication are for representation only.
Picture Menu
The PICTURE menu options apply to the video for the main
TV and video input selections.
Picture Preset Press the right arrow button to scroll through
the available picture preset settings: Natural, Bright, Soft, and
Personal. Choose the setting that is best for your viewing
environment.
Auto Color Turn this option on to automatically correct the
color of the picture. This is especially useful for tracking
realistic flesh tone colors as you switch from channel to
channel.
Color Warmth Press the right arrow button to scroll through
the color adjustments: Cool for a more blue palette of
picture colors; Normal; and Warm for a more red palette of
picture colors.
Brightness Adjusts the brightness of the picture.
Contrast Adjusts the difference between the light and dark
areas of the picture.
Color Adjusts the richness of the color.
Sharpness Adjusts the crispness of the edges in the picture.
Note: Sharpness isn't available for component video input channels
(CVID2 or CVID3).
Tint Adjusts the balance between the red and green levels.
Note: Tint isn't available for component video input channels (CVID2
or CVID3).
When you change any of these picture settings, the Picture
Preset changes to Personal. Use the left or right arrow
button to make adjustments. To return to the PICTURE menu,
press the up or down arrow button.
Tilt The TV has an extra large picture tube that makes it
vulnerable to the effects of the Earth's magnetic field. You
may need to adjust the picture tilt.
Setup Menu
Auto Ch. Search (Auto Channel Search) Allows you to
choose your signal type and begin an auto channel search.
Signal Type Press the left or right arrow button to
select the signal your TV is receiving. Choose Cable if you
are currently using cable or a cable box for TV signals.
Choose Antenna if you are currently using an off-air
antenna for TV signals.
Start Searches for channels the signal is receiving and
stores them in the TV's channel list. Go to page 8 for
more information.
Chapter 4
Advertisement
Table of Contents
