Messages regarding printing or adjustment
Cannot adjust printhead.
The Printhead nozzles are clogged.
The Printhead cannot be aligned; highly transparent
lm is loaded.
The Printhead is installed crooked.
Cannot adjust paper feed.
The Printhead nozzles are clogged.
Highly transparent lm is loaded that cannot be used
for automatic feed amount adjustment.
Cause
Cause
Messages regarding printing or adjustment
Corrective Action
Execute Head Posi. Adj. again, as follows.
1.
Press the OK button to clear the error.
2.
Print a test pattern to check the nozzles.
(→P.692)
3.
Clean the Printhead if the nozzles are clogged.
(→P.694)
4.
Execute Head Posi. Adj. again.
(→P.666)
Press the OK button to clear the error.
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.666)
Straighten the Printhead as follows, and then execute
Head Posi. Adj. again.
1.
Press the OK button to clear the error.
2.
Use Head Inc. Adj. to adjust the angle of
inclination of the Printhead.
(→P.670)
3.
Execute Head Posi. Adj. again.
(→P.666)
Corrective Action
Execute Adj. Quality again, as follows.
1.
Press the OK button to clear the error.
2.
Print a test pattern to check the nozzles.
(→P.692)
3.
Clean the Printhead if the nozzles are clogged.
(→P.694)
4.
Execute Adj. Quality again.
(→P.676)
Press the OK button to clear the error, and then
adjust the feed amount manually.
(→P.678)
Error Message 767