3
Remove the entire BJ Cartridge with the ink tanks in
place.
Note
If you are removing a partially used BJ Cartridge, store it in the
•
BJ Cartridge container.
Always hold the BJ Cartridge by the circles embossed on the
•
left and right sides of the BJ Cartridge. Never touch the metal
contacts or the print head on the BJ Cartridge.
4
Remove a new BJ Cartridge from its package.
Remove the orange protective cap( ) then slowly
remove the orange protective tape( ).
Important
Never attempt to reattach the tape or cap to a BJ Cartridge.
•
Discard the protective cap and tape according to the local laws
and regulations regarding disposal of consumables.
Do not leave an empty ink tank in the BJ Cartridge. Remove it
•
immediately after the ink runs out.
If a partially used ink tank must be removed for some reason,
•
keep the ink tank installed in the BJ Cartridge. Otherwise the
ink will dry and print jobs may not be performed properly after
the ink tank is installed again.
5
Insert the BJ Cartridge into the cartridge holder.
34
Remove these
two items.
Do not touch
these precision
components.