Standards And Symbols - Genie GTH-1048 Operator's Manual

ROUGH TERRAIN FORK LIFT SAFETY
Many aspects of rough terrain forklift operation and testing are discussed in standards
published by the American National Standards Institute. These Standards are updated on
a regular basis with addendas. Genie recommends that you purchase and refer to the
following standards.
ANSI B56.6 – Rough Terrain Fork Lifts
This Standard can be purchased from:
American National Standards Institute
25 West 43nd Street, 4th Fl.
New York, New York, 10036
Tel. 212.642.4900
Fax. 212.398.0023
The symbols below are used to inform the operator of important information concerning
the operation of this machine.

STANDARDS AND SYMBOLS

STANDARDS
SYMBOLS
DANGER – Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING – Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION – Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
ATTENTION – Indicates a situation which, if not avoided,
may result in property or equipment damage.
1 - 4