Table of Contents
Advertisement
Connections
Setup
Set the
Menu
Language
The first part of the setup allows you to select your preferred
language for the menu system.
1. Highlight
your preferred
language for the menu system using the arrow buttons.
2.
PressOKtoselectthatlanguage(theChannelSetupsereenappearswithAutoehennelseereh
highlighted).
Complete Auto Channel Search
This part of the setup allows the lV to search for all channels viewable through your antenna or
cable lV system. This is sometimes called auto programming.
Press OK to begin auto channel
search. When the channel search is complete, press OK to access the List EfLabels screen.
Changing Lists and Labels
The List 8: Labels part of the setup lets you edit your channel list and choose or create a personal
six-character
label for each channel.
Nore:Changing List end Labelscan be time consuming Youcan change thesea t a later time by accessingthe
Setup menu.
1, Press the left or right arrow to scroll through the available channels and choose the channel
you want to edit.
2.
3.
4.
5.
Press the down arrow to highlight
the In channel list option. Press the left or right arrow
button
to add (the box is checked) or remove (the box is unchecked) the channel from the list.
Press the down arrow to highlight
the Channel labe! option. Press the left or right arrow
button
to scroll through the available list of 25 most common labels. The last option in the list
allows you to create your own six-character
label for the channel (the first letter of the label
is highlighted).
Press the 1 or 2 number button
to change the first letter of the label.
Press the right arrow to highlight
the second letter, then press the 1 or 2 number button to
change the second letter, etc...
When you are finished creating your label, select Go back (the Auto Convergence menu
appears).
Auto Convergence
Your TVIDVD's picture tubes might have been disturbed during delivery or after you moved the
TVlDVD, causing the color in your IV/DVD to be out of alignment.
The colors adjust by starting
auto convergence.
I.
Press OK to begin auto convergence.
2.
When the auto convergence is complete, the Red center convergence menu appears. The cross
in the middle of the screen should be yellow. If it is not, use the arrow buttons to move the
red cross to overlap the green cross. Press OK when adjustments
are complete.
3. The Blue center convergence menu appears with a wan cross in the middle of the screen. If it
is not, use the arrow buttons to move the blue cross to overlap the green cross. Press OK (the
lV tunes to the last available channel in the channel list).
Chapter 1
13
Advertisement
Table of Contents
