Table of Contents
Advertisement
Connections
Setup
TWDVD
TV/DVD + HD Receiver + VCR
1. Make sure cable or antenna
and/or satellite
is connected
to your VCR.
A. Connect the coaxial cable from your cable outlet or antenna to the antenna input on the HD Receiver.
B, Connect the satellite dish antenna to the satellite input on the HD Receiver,
2.
Connect
your HD Receiver to your W/DVD.
A. Connect
the audio (white and red) cables to the CMP1 L/MONO and R audio jacks on the back of the TV/DVD and to the Audio Output
jacks on
the liD Receiver.
B. Connect
three video grade cables to the CMP1 Y, P_, PRjacks on the back of the TV/DVD and to the Y, PB, PRjacks on the HD Receiver.
Notes: They P_P,jacks are sending the digital cablesignal to the 1V/DVD.
If your HD Receiverhas a DVIoutput, connect the HD Receiverto your TV/DVDusinga DVIcable.Make sureto connect the left and right audio cables to theDVI L/MONO and R
jacks on the TV/DVD.
3.
Connect
your lid Receiver to your VCR.
A. Connect a coaxial cable to the liD Receiver's antenna output and to VCR's antenna input.
B. Connect the audio {white and red) cables to the Audio Output jacks on the lid Receiver and to the Audio Input jacks on the VCR.
C. Connect the video cable to the Video Output jack on the HD Receiver and to the Video Input jack on the VCR.
4.
Connect your VCR to your _//DVD.
A. Connect a coaxial cable to the VCR's antenna output
and to the ANTENNA/CABLE Input jack on the ]V/DVD.
B. Connect the audio {white and red) cables to the VlD2 L/MONO and R audio jacks on the back of the ]V/DVD and to the Audio Output jacks on
the VCR.
C. Connect the video cable to the VlD2 V (video] jack on the back of the TV/DVD and to the Video Output jack on the VCR.
6o to page 13
Chapter 1
7
Advertisement
Table of Contents
