Table of Contents
Advertisement
Connections
Setup
W/DVD
W/DVD + Satellite
Receiver + VCR
1. Connect your VCRto your W/DVD.
A. Connect a coaxial cable to the VCR'santenna output and to the ANTENNA/CABLE Input jack on the W/DVD.
& Connect the audio (white and red) cables to the VlD2 L/MONO and RAudio jacks on the back of the W/DVD and to the Audio Output jacks on
the VCR.
C. Connect the video cable to the VID2 V (Video)jack on the back of the W/DVD and to the Video Output jack on the VCR.
2. Make sure cable or antenna is connected
to your VCR.
Connect the coaxial cable from your cable outlet or antenna to the antenna input on the VCR.
3. Connect your Satellite Receiver to your W/DVD.
A. Connect the audio (white and red] cables to the VlD1 L/MONOand R Audio jacks on the back of the lV/DVD and to the Audio Output jacks on
the Satellite Receiver.
[3.Connect the video cable to the VlD1 V (Video) jack on the back of the lV/DVD and to the Video Output jack on the Satellite Receiver.
C. If your Satellite Receiverhas an S-Video jack, connect an S-Video cable (instead of the video cable in step B) to the S-VIDEO jack on the
W/DVD and to the S-VIDEOjack on the satellite receiver.
Go to page
13
8
Chapter 1
Advertisement
Table of Contents
