Pppoe/Pppoa - Edimax AR-7186WnA User Manual

Field
VPI is set to 8.
Virtual channel identifier (VCI) is the virtual channel between
two points in an ATM network. Its valid value is between 1
VCI
and 65535. Enter the correct VCI provided by your ISP. By
default, VCI is set to 35.
IP Address Enter the IP address provided by your ISP.
Subnet Enter the subnet mask provided by your ISP.
Mask
ISP Enter the default gateway provided by your ISP.
Gateway
Connection You can select LLC or VC-Mux. In this example, the
Type encapsulation mode is set to 1483 Bridged IP LLC.

5.3.1. PPPoE/PPPoA

Select PPPoE/PPPoA, click NEXT, and the page as shown in the following
figure will appear.
The following table describes the parameters in this page:
Field
Enter the username for PPPoE dial-up, which is provided by
Username
your ISP.
Enter the password for PPPoE dial-up, which is provided by
Password
your ISP.
Virtual path identifier (VPI) is the virtual path between two
VPI
points in an ATM network. Its valid value is between 0 and
Description
Description
46