Bridge Mode - Edimax AR-7186WnA User Manual

Connection type
4.2.2.

Bridge Mode

Parameter
VPI
VCI
Please check with your ISP the method of
multiplexing. In PPPoE/PPPoA mode, please select
"PPPoE LLC", "PPPoE VCMUX", "PPPoA LLC" or
"PPPoA VCMUX".
Description
Virtual path identifier (VPI) is the virtual path
between two points in an ATM network. Its valid
value is in the range of 0 to 255. Enter the correct VPI
provided by your ISP. By default, VPI is set to 8.
Virtual channel identifier (VCI) is the virtual channel
between two points in an ATM network. Its valid
value is in the range of 32 to 65535 (0 to 31 is
reserved for local management of ATM traffic). Enter
the correct VCI provided by your ISP. By default, VCI is
set to 35.
33