Options; Modifiers - Whirlpool Duet WFW9200SQA11 Use & Care Manual

You can customize your wash by adding options to your cycle
selections. You can add or change an option after starting a cycle
anytime before the selected option begins. Not all options are
available with all cycles. Available options will glow amber.
Current selections will glow green. If an option is unavailable with
a selected cycle, the light will not illuminate.
E×lra Rinse
[)elayWash
®
Cyde _uttos
Signal Sound
See the "Laundry Guide" for an overview of possible options
for each Wash Cycle selection.
You can select more than one option for a cycle. Some
options cannot be added to some cycles. If an option is
unavailable with a selected cycle, there will be 3 short tones,
and the light for that option will not glow when selected.
Delay Wash
Use this to begin the wash cycle later.
• Select DELAY WASH until the desired time (in hours) shows in
the Estimated Time Remaining display.
• Select START. The countdown to the wash cycle will show in
the display window.
When delaying a cycle, use only powdered detergents in the
main wash compartment since liquid detergents may seep
out of the compartment during Delay Wash, before the wash
cycle begins.
Extra Rinse
An extra rinse can be used to aid in the removal of detergent or
bleach residue from garments. This option provides an additional
rinse with the same water temperature as the first rinse.
Cycle Signal
This signal is helpful when you are removing items from the
washer as soon as it stops. Press CYCLE SIGNAL to select Loud,
Soft or Off.
Button Sound
Button sounds are used to notify you of what has been selected
or to let you know when something is not available. Press
BUTTON SOUND to select Loud, Soft or Off.
Preset cycle settings of Water Temperature, Spin Speed, and Soil
Level can be changed. You can change a modifier after starting a
cycle anytime before the selected modifier begins. Not all
modifiers are available with all cycles and options. Available
options will glow amber. Current selections will glow green. If a
modifier is unavailable with a selected cycle, the light will not
illuminate.
NOTE: The panel shown below may be different from that of your
model.
Super Hot "
Flig_
Hot ;;_ Mediurr _4eay
Wars ;; Low /10final
( Cold NoSpir' ght
@®®
Water_errrl SOn S0il
All¢_ld 5Deed Level
Rinses
• To change the water temperature, select the WATER TEMP
button until the desired setting glows green.
• To change the spin speed, select the SPIN SPEED button
until the desired setting glows green.
• To change cycle time, select SOIL LEVEL button until the
desired setting glows green.
Wash/Rinse Temp
Select a water temperature based on the type of load you are
washing. Use the warmest wash water safe for fabrics. Follow
garment label instructions.
In wash water temperatures colder than 60°F (15.6°C),
detergents do not dissolve well. Soils may be difficult to remove.
6TH SENSE
TM
Technology
The 6TH SENSE
TM
Technology control electronically senses and
maintains a uniform water temperature. 6TH SENSE
TM
Technology control regulates incoming hot and cold water. 6TH
SENSE
TM
Technology control is automatically turned on when a
cycle is selected. See "Preset Cycle Settings" in "Cycles." 6TH
SENSE
TM
Technology control ensures consistent cleaning.
• 6TH SENSE
TM
Technology control works for all wash
temperature settings.
sense"
16