Program The Water Softener - Model Wries30; Set Time Of Day - Whirlpool WHES20 Installation And Operation Manual

Program the Water Softener
SET SALT LEVEL button Display
CHECK PRESS TO SCHEDtJLE
/ LEVEL ._ HOLDTO START
/
RECHARGE button
UP button
PROGRAM
/ \
PROGRAM button DOWN Button
Figure 11
- Model WHES30
J
If you have questions about installation, programming, operating and routine maintenance...
call 1-866-986-3223, Monday - Friday, 8 am to 9 pm, EST.
Set Time of Day
When the transformer is plugged into the electrical outlet, a model code and a test number (example:
9 "_ " • "
s3.0), begin to flash in the faceplate display. Then, 1_:00 PM and the w( rds CURRENT TIME begin
to flash.
NOTE:
W7
If .... shows in the display, press the UP 5-_ or DOWN _/button until LE30
shows in the display. Then, press the O PROGRAM button to set, and change to the
flashing CURRENT TIME display.
If the words "CURRENT TIME" do not show in the display, press the O PROGRAM button until
they do.
1. Press the _ Up or _ Down buttons to set the present time. Up moves the display ahead; down
sets the time back.
U'£O,.
I._-113
Cut_nt
Time
i m.3C,_
I I._-113
Cut_nt
Time
Be sure AM or PM is correct.
NOTE: Press buttons and quickly release to slowly advance the display. Hold fk)r fast
advance. This procedure applies fk)r all folk)wing settings.
I9