Options - Whirlpool Duet GHW9150PW0 Use & Care Manual

You can customize your wash by adding "Options" to your cycle
selections. You can add or change an option after starting a cycle
anytime before the selected option begins. Not all options are
available with all cycles.
O Delay Wash
@ Extra Rinse
Options
See the "Laundry Guide" for an overview of possible options
for each Wash Cycle selection.
You can select more than one option for a cycle. Some
options cannot be added to some cycles.
If an option is available with a selected cycle, the light for that
option will glow when selected.
If an option is unavailable with a selected cycle, there will be a
short tone, and the light for that option will not glow when
selected.
Delay Wash
Use this to begin the wash cycle later.
• Select Delay Wash until the desired time (in hours) shows in
the Estimated Time Remaining display.
• Select START. The countdown to the wash cycle will show in
the display window.
Extra Rinse
An extra rinse can be used to ensure the removal of detergent or
bleach residue from garments. This option provides an additional
rinse with the same water temperature as the first rinse,
Preset cycle settings of Water Temperature, Spin Speed, and
Cycle Time can be changed. You can change a modifier after
starting a cycle anytime before the selected modifier begins. Not
all modifiers are available with all cycles and options.
NOTE: The panel shown below may be different from that of your
model.
Q Hot/Cold • High
Q WilrmI Woml Q Medium • Louder
Q Wolm/Cold 0 Low 0 Softer
• Cold/CoW @ No _/n Q Off
© © C>
Water Tet_p 5pin Speed End Of Cycle Signal
Wash / I_lnse Hold fat 3 _econJs _o
Luck / Un}ock Control
To change the water temperature, select the WATER TEMP
button until the desired setting glows.
To change the spin speed, select the SPIN SPEED button
until the desired setting glows.
• To change the loudness of the End of Cycle Signal, select
END OF CYCLE SIGNAL.
Remoln/ng
5oit
Level
• To change cycle time, select SOIL LEVEL button.
Wash/Rinse Temp
Select a water temperature based on the type of load you are
washing. Use the warmest wash water safe for fabrics. Follow
garment label instructions.
Warm rinses leave the loads dryer than cold rinses. Warm rinses
increase wrinkling. In cold climates, a warm rinse makes the load
more comfortable to handle. Cold rinses save energy.
Temperature Guide
Wash Water Temperature Suggested Fabrics
HOT Whites and pastels
Heavy soils
WARM Bright colors
Moderate to light soils
COLD Colors that bleed or fade
Light soils
In wash water temperatures colder than 70°F (21 °C), detergents
do not dissolve well. Soils may be difficult to remove.
ACCUWASH
TM
Automatic Temperature Control
The ACCUWASH
TM
control electronically senses and maintains a
uniform water temperature. ACCUWASH control regulates
incoming hot and cold water. ACCUWASH control is
automatically turned On when a cycle is selected. (See "Preset
cycle settings" in "Cycles,")
• ACCUWASH
TM
control ensures consistent cleaning.
• ACCUWASH
TM
control works for all wash and rinse
temperature settings.
15